Unterschiede

Hier werden die Unterschiede zwischen zwei Versionen angezeigt.

--- sa_ahcomm:device_setup [09.11.2005 14:28 (vor 19 Jahren)] – cwacha
+++ sa_ahcomm:device_setup [16.11.2016 23:18 (vor 8 Jahren)] (aktuell) – Externe Bearbeitung 127.0.0.1
@@ Zeile 1: / Zeile 1: @@
+===== iPAQ Initialization =====
+  - Hard-Reset the Devices by pressing and holding Button 1 (Calendar) and 4 (iTask) simultaneously and then pressing the Resetbutton (using the Pen) for more than 2 seconds. Press the Reset-Button again to powerup the device
+  - After the iPAQ has booted for the first time, complete the introduction and wait until the device has rebooted.
+  - Use the iPAQ Backup application to restore Base-xx.pbf (the File can be found in ./sa_ahcomm/ FIXME).
+  - Under Settings->System->About->Device ID set the //Device Name// to ahcomm-XX where as XX represents the last two digits of the TIK-Inv. number.
+===== Active Sync with Computer =====
+  - Place the device into the cradle and wait until the New Partnership dialog opens
+  - Choose //Standard Partnership//
+  - Choose //Synchronize with this computer//
+  - Choose //No, I want to synchronize with two computers// (You can only sync with a max. of 2 computers)
+  - Deselect all conduits
+  - Click Finish
+Remark that you have to sync twice so that the time will get updated too!
+If you want to connect a device to a third computer, use guest mode instead.
+Alternatively you can also choose //Guest Partnership//. No synchronization is done in this mode but you have
+to click the Wizard away every time you connect the device with the computer.
+===== Settings used for Base Backup =====
+(for instructions on how to use the backup refer to the Active Sync Howto)
+Settings:
+  * Sound off
+  * Settings->About->Device ID->Device Name = ahcomm-NEW
+  * Owner->Name = ahcomm-NEW
+  * Menus: everything deactivated except File Explorer
+  * Menus: New Menu: everything deactivated except Note
+  * Today: Theme Windows Default
+  * Today: Items: Date, Owner Info, TodayPanel activated - others deactivated
+  * Backlight: Brightness On Battery set to minimum value
+  * Clock & Alarms: Timezone: Berlin, Rome (GMT+1)
+  * Power: Advanced: Device should run all the time
+  * Power: USB Charging deactivated to save battery charge cycles
+  * Beam: Receive all incoming infrared beams deactivated
+  * Regional Settings: Time adjusted (24h)
+  * Regional Settings: Date adjusted (dd-MMM-yy)
+  * iPAQ Wireless: Network Adapters: HP iPAQ Wi-Fi Adapter: IP set to 192.168.0.0/24
+==== Create the Backup ====
+The Backup was created directly on the iPAQ using the iPAQ Backup Tool
+  - Switch to advanced mode
+  - Unselect all
+  - Select System Data Folder
+  - Backup