# comments start with '#' .. ahaaa ;-)
# defaults in []
# options are CASE SENSITIVE (yes im lazy..)

# debug [0]
# if enabled lists lots of debug messages 
#
#debug 1

# check_delay [1]
# time between connection tests. ppplog sleeps exaclty check_delay 
# seconds. you can increase this value as you like. ppplog will stop
# accounting as soon as it detects that the link is down (which takes more time
# if check_delay is big). 
#
#check_delay 1

# dial_delay [0]
# the delay in seconds between the start of pppd and the actual internet
# connection. depends on your phone company. normally they charge you as soon
# as the line is established.
#
# dial_delay 0

# silent [0]
# you will get no output if silent is 1
#
#silent 0

# background [0]
# program goes to background immediately after start. useful if you
# would like it to run as a service
# 
#background 0

# config [no default]
# THIS LINE IS IMPORTANT! The line creates a new set of zone definitions. All accounting
# options after this line are attached to the config set. So this line has to appear before you 
# define log-/savefiles zone definitions etc. If you want to log costs for another
# phone company at the same time just add another 'config' option. 
#
#config my_sunrise_definition

# logfilename [~/ppplog.log]
# where do you want the logfile to be. set to /dev/null if you dont like a 
# logfile (why do you use this program???). gets updated every time a connection
# gets closed.
#
#logfilename /usr/local/etc/ppplog/ppplog.log

# savefilename [~/.ppplog]
# the file where ppplog keeps track of the running costs. the file gets
# updated every time a connection gets closed.
#
#savefilename /usr/local/etc/ppplog/ppplog.save

# isolog [0] - nice format
# do you prefer a nicley formatted logfile or an ISO compliant (hopefully)
# logfile for further processing?
#
#isolog 0

# isodelim [" "]
# only used if isolog = 1. the delimiter between the log entries 
#
#isodelim "," # CSV Mode

# initial_cost [0.00]
# some phone companies charge you an establishing fee. (i.e. sunrise in 
# Switzerland = 0.03/per call
#
#initial_cost 0.03

# min_cost [0]
# a call always costs at least that much. even if your phone call would cost
# less because it didn't took long enough. depends on your phone company.
# normally you set either initial_cost or min_cost.
#
#min_cost 0

# currency_before ["$"]
# a text string displayed before the cost if silent = 0. if isolog = 1 this
# is the string used in the log file.
#
#currency_before "CHF"

# currency_after [""]
# displayed in formatted log and if silent = 0 after the cost. 
#
#currency_after ""

# uom_cost [1]
# the unit of measure cost (in seconds) is used to simplify the zone cost 
# entries. most phone companies tell you the phone cost per hour. In this 
# case set uom_cost to 3600. see the examples below and mail me if that is 
# unclear.
#
#uom_cost 3600

# day [no default]
# day is used to simplify the zone entries. just select the days when the zone
# is active. if the zone is active on weekday's, write day 1 2 3 4 5. 1 stands
# for monday, 2 for tuesday etc.
#
#day 1 2 3 4 5

# zone [no default]
# zone defines a cost zone. this is the most important option here. tell  
# ppplog when the zone starts, when it ends, how long a unit is and how 
# much the unis costs. example
#
#      name of zone   starts at 08:00 ends 17:00  unit 1 sec and costs 1.5
# zone "normalcharge" 08 00           17 00       1              1.50 
#
# if it costs 1.5 per hour remember to set uom_cost 3600.
#
#zone char* int int  int int   int float

# specialday [no default]
# specialday is a special zone used for national holidays. the format is similar
# to zone. remark the last 3 parameters. special days are always checked first.
# ppplog uses the first zone that matches the current time and date!! 
#
# specialday name starthour startmin stophour stopmin unitlength unitcost day month year
#specialday "x-mas" 08 00 23 00 1 1.5 24 12 2003

# include []
# include reads another config file. this helps you keep national holiday
# definitions in a seperate file. of course you can put any config options
# into that file 
#
#include /usr/local/etc/ppplog/myholidays.conf

# sunrise switzerland has 3 zones on weekdays and 2 zones on weekends.
# they charge you per second not per unit. you have to pay 0.03 CHF for
# every established call
#
# Weekdays:
# 08:00 - 17:00    CHF 1.67 / Hour "Normal Woche"
# 17:00 - 23:00    CHF 1.50 / Hour "Nieder Woche"
# 23:00 - 08:00    CHF 0.60 / Hour "Nacht Woche"
#
# Weekends:
# 08:00 - 23:00    CHF 1.50 / Hour "Nieder Weekend"
# 23:00 - 08:00    CHF 0.60 / Hour "Nacht Weekend"
#
# this setup looks like this

#config sunrise
#currency_before "CHF"
#initial_cost 0.03
#min_cost 0
#uom_cost 3600
#
#day 1 2 3 4 5
#zone "Normal Woche" 08 00 17 00 1 1.67
#zone "Nieder Woche" 17 00 23 00 1 1.5
#zone "Nacht Woche" 23 00 08 00 1 0.6
#
#day 6 7
#zone "Nieder Weekend" 08 00 23 00 1 1.5
#zone "Nacht Weekend" 23 00 08 00  1 0.6
#
#you can add national holiday here
#day 1 2 3 4 5
#special "x-mas" 08 00 16 00 1 23
#.. etc.
#
# thats it! easy, isn't it?

# swisscom switzerland has 3 zones on weekdays and 2 zones on weekends.
# they charge you per unit. every phone call costs at least 0.2 CHF.
# costs are rounded up to 0.1 CHF.
#
# Weekdays:
# 08:00 - 17:00    CHF 2.8 / Hour "Normal Woche"
# 17:00 - 23:00    CHF 1.80 / Hour "Nieder Woche"
# 23:00 - 08:00    CHF 0.70 / Hour "Nacht Woche"
#
# Weekends:
# 08:00 - 23:00    CHF 1.80 / Hour "Nieder Weekend"
# 23:00 - 08:00    CHF 0.70 / Hour "Nacht Weekend"
#
# this setup looks like this

#config swisscom
#currency_before "CHF"
#initial_cost 0
#min_cost 0.2
#
#day 1 2 3 4 5
#zone "Normal Woche" 08 00 17 00 129 0.1
#zone "Nieder Woche" 17 00 23 00 200 0.1
#zone "Nacht Woche" 23 00 08 00 514 0.1
#
#day 6 7
#zone "Nieder Weekend" 08 00 23 00 200 0.1
#zone "Nacht Weekend" 23 00 08 00 514 0.1
#
# you can calculate the unit length with this formula:
# 3600 * [cost per unit] / [cost per hour]
# round the result.
#
## Have Phun!